GB3FT DATV Repeater Blackpool, NW Lancashire IO82LU

Repeater output is available on line here

There is about a 20 second delay when using the BATC streamer site due to HTML5 encoding
However this delay can be reduced to a few seconds by using VLC player and entering
rtmp://rtmp.batc.org.uk/live/gb3ft into media / open network stream.
There can be up to a one minute delay before all the status information below is updated

System Status

= ? V = ? A = ? V = ? V

Controller Commands

The following commands select which signal is to be relayed and can be sent on 144.750MHz using DTMF
All commands for the controller start with a * and end with a #
If the repeater controller becomes unresponsive or sticks on the wrong input send *90#
To display the Ryde RX input send *81#
To display the FM rx input send *82#
To display the streamer rx input send *83#
To reboot the controller send *97359#
To display the status of the controller send *91#